DX54D prepainted galvanized karfe /ppgi/prime karfe nada/ karfe takardar

DX54D prepainted galvanized karfe /ppgi/prime karfe nada/ karfe takardar

Layin samarwa
Kauri Girman kauri na hannun jari	0.01mm-4mm 0.5MM, 0.6, 0.75, 0.8, 1.0, 1.2, 1.5, 1.75, 1.8, 1.95, 2.0, 2.2, 2.3, 2.5, 2.75, 3.0, 3.5., 3.05, 3.75, 3.75
Nisa Girman nisa hannun jari	1000mm-1500mm 1250mm; 1500mm
Matsayin tallace-tallace mai zafi	DX51D + Z(ZINC); SGCC, DX52D, DX53D, DX54D, BGH340, SGH440, SGC340
Karfe nada sarrafa	1. Yanke faɗi da tsaga cikin ƙaramin faɗi 2. Rarraba manyan naɗa cikin ƙananan gadaje 3. Yanke maƙarƙashiyar ƙarfe cikin takardar ƙarfe / faranti
Lokacin biyan kuɗi	1. L/C 2. T/T

Akwai Sabis na Kera
1.Cut karfe coils a cikin takardar karfe, yanke zuwa tsayi, yanke zuwa kowane tsayi.
2.Width yanke da tsaga cikin kananan nisa.
3.One coil ne game da 22-29tons, wasu tashar jiragen ruwa na kasar ba za su iya loda manyan coils, don haka bukatar daban, babban nada a cikin 3- 5 kananan coils.
4.Launi: Sea blue, launin toka fari, RAL launi ne OK
5. Surface Jiyya: Galvanized, Chromated, Unnoiled / Mai, Bright Gama, Spangle
6.Surface Kariya: PE, PVDF, SMP, HDP, da dai sauransu
7.Paint kauri: Bayan baya: 5-7micron Babban gefen: 25 + /- 5 micron ko a matsayin buƙata.

Amfaninmu
Babban inganci & Madaidaicin farashi
Fiye da alamu 200 don zaɓinku
Babban kamfanin ajiya & yawa a hannun jari
Yawan yana tare da fifikon magani
Tsayayyen wadata
Keɓancewa cikin girman
Yanke sabis bisa ga buƙatun ku
Kyakkyawan sabis na siyarwa

Abubuwan sinadaran sunadarai da kaddarorin inji

Haɗin Sinadari
GARADI	C	Si	Mn	P	S	Ti
SGCE/DX54D+Z	≤0.10	≤0.30	≤0.30	≤0.03	≤0.020	≤0.020
Kayayyakin Injini
GARADI	Ƙarfin Haɓaka MPa		Ƙarfin Tensile MPa		Tsawaita %
SGCE(DX54D+Z)	-		≥270		40

FAQ

1.Q: Shin ku masana'anta ne ko kamfani na kasuwanci?
A: Mu masu sana'a ne masu sana'a, kuma kamfaninmu kuma ƙwararrun ƙwararrun ƙwararrun masana'antun kayan ƙarfe ne.Za mu iya samar da samfuran ƙarfe da yawa.

2.Q: Menene ma'aikatar ku ke yi game da kula da inganci?
A: Mun samu ISO, CE da sauran takaddun shaida. Daga kayan aiki zuwa samfurori, muna duba kowane tsari don kula da inganci mai kyau.

3.Q: Zan iya samun samfurori kafin oda?
A: E, mana. Yawancin samfuran mu kyauta ne. za mu iya samarwa ta samfuran ku ko zane-zane na fasaha.

4.Q: Yaya kuke yin kasuwancinmu na dogon lokaci da kyakkyawar dangantaka?
A: Muna kiyaye inganci mai kyau da farashin gasa don tabbatar da amfanin abokan cinikinmu; Muna girmama kowane abokin ciniki a matsayin abokinmu kuma muna yin kasuwanci da gaske kuma muna yin abota da su. Ko daga ina suka fito.

5.Q: menene lokacin bayarwa?
A: Lokacin isar da mu shine kusan mako guda, lokaci gwargwadon adadin abokan ciniki.