TS EN 10028-2 Matsin Jirgin Ruwa Karfe Plate P265GH

Samfurin farantin karfe da ake samu ta daidaitaccen EN10028-2 ya haɗa da maki 5 na ƙarfe: P265GH, P295GH, P355GH, 16Mo3, 10CrMo9-10.
TS EN 10028-2 Matsayin Turai wanda ke ƙayyadaddun buƙatun don farantin karfe da samfuran kayan aiki don kayan aikin matsa lamba waɗanda ba a iya walƙiya da ƙarfe mai ƙarfi tare da kaddarorin zafin jiki kamar yadda aka ƙayyade.

• Kauri: 6mm-80mm
• Tsawon: 6000mm ~ 15000mm ko kamar yadda ake bukata
• Nisa: 1800mm-3220mm
• Aikace-aikace:  Tankin ƙarfe farantin karfe, farantin tukunyar jirgi mai ƙarfi, Matsi na ƙarfe farantin karfe
• Ƙarin Fasaha: mai zafi mai zafi, mirgina mai sarrafawa, daidaitawa, yanayin zafi, daidaitawa+ zafin rai, taurin + zafin rai, HIC, SSC, SPWHT, Gwajin ɓangare na uku.
• Fasa:  Rufaffe ko fashewar fashewa da fenti.
• Yanayin isarwa: Maɗaukakin Zafi, Mai Sanyi
• Matsayin Karfe: P265GH, P295GH, P355GH, 16Mo3, 10CrMo9-10

Abubuwan Kemikal:

Karfe daraja	Lamba	C	Si	Mn	Pmax	Smax	Gabaɗaya	N	Cr	Kuba	Mo	Nb	Ni	Ti	V	Wasu
P235 GH	1.0345	≤0.16	≤0.35	0.60cto1.20	0.025	0.015	≤0.020	≤0.012d	≤0.30	≤0.30	≤0.08	≤0.020	≤0.30	0.03	≤0.02	Cr+Cu+Mo+Ni: ≤0.70
Saukewa: P265GH	1.0425	≤0.20	≤0.40	0.80cto1.40	0.025	0.015	≤0.020	≤0.012d	≤0.30	≤0.30	≤0.08	≤0.020	≤0.30	0.03	≤0.02
Saukewa: P295GH	1.0481	0.08 zuwa 0.20	≤0.40	0.90cto1.50	0.025	0.015	≤0.020	≤0.012d	≤0.30	≤0.30	≤0.08	≤0.020	≤0.30	0.03	≤0.02
Saukewa: P355GH	1.0473	0.10 zuwa 0.22	≤0.40	1.10 zuwa 1.70	0.025	0.015	≤0.020	≤0.012d	≤0.30	≤0.30	≤0.08	≤0.020	≤0.30	0.03	≤0.02
16Mo3	1.5415	0.12 zuwa 0.20	≤0.35	0.40 zuwa 0.90	0.025	0.010	e	≤0.012	≤0.30	≤0.30	0.25 zuwa 0.35	-	≤0.30	-	-	-
18MnMo4-5	1.5414	≤0.20	≤0.40	0.90 zuwa 1.50	0.015	0.005	e	≤0.012	≤0.30	≤0.30	0.45 zuwa 0.60	-	≤0.30	-	-	-

Kayayyakin Injini:

Karfe daraja		Jihar Bayarwa	Kauri mm	Ƙarfin Ƙarfin Mpa≥	Ƙarfin Ƙarfi Mpa	Tsawaita %≥	Ƙarfin Tasiri mafi ƙarancin zafin jiki
suna	lamba						-20	0	+20
P235 GH	1.0345	+ Nd	≤16	235	360～480	24	27	34	40
			16 t≤40	225
			40 t≤60	215
			60 t≤100	200
			100 t≤150	185	350～480
			150 t≤250	170	340～480
Saukewa: P265GH	1.0425	+ Nd	≤16	265	410～530	22	27	34	40
			16 t≤40	255
			40 t≤60	245
			60 t≤100	215
			100 t≤150	200	400～530
			150 t≤250	185	390～530
Saukewa: P295GH	1.0481	+ Nd	≤16	295	460～580	21	27	34	40
			16 t≤40	290
			40 t≤60	285
			60 t≤100	260
			100 t≤150	235	440～570
			150 t≤250	220	430～570
Saukewa: P355GH	1.0473	+ Nd	≤16	355	510～650	20	27	34	40
			16 t≤40	345
			40 t≤60	335
			60 t≤100	315	490～630
			100 t≤150	295	480～630
			150 t≤250	280	470～630
16Mo3	1.5415	+ Ne	≤16	275	440～590	22	f	f	31