SA 515 GR.70 Bolier da Matsa lamba jirgin ruwa farantin karfe

SA 515 GR.70 PlateS ya sami amfani a yawancin aikace-aikacen masana'antu. Wasu aikace-aikacen su ne samar da wutar lantarki, ɓangaren litattafan almara & masana'antar takarda, masana'antar hako mai a bakin teku, sinadarai na musamman, da kuma magunguna. Sauran aikace-aikacen da aka same shi ana amfani da su shine na'urori masu sarrafawa, sarrafa gas, kayan aikin sinadarai, kayan ruwan teku, kayan aikin magunguna, da masu musayar zafi. A lokacin zayyana tsari na dumama kayan aikin kamar ducts, boilers, zafi rollers, kwantena, idan zafin jiki haye 450 deg C da kuma a cikin 550 deg C da tukunyar jirgi ingancin AS faranti za a iya amfani da nagarta sosai don ƙirƙira da laka ganguna, tururi ganguna, da dai sauransu resistant zuwa abrasion yana sanya shi amfani da shi a yanayin aiki mafi tsanani kamar a cikin masana'antar ma'adinai.

SA 515 GR.70 PRESSURE VESSEL STEEL Plates an ƙaddamar da gwajin kuma an yi shi don bincika ingancin samfur. Gwaje-gwajen da aka yi sune gwaje-gwajen taurin kai, gwaje-gwajen lalata, gwajin injina, da gwaje-gwajen sinadarai. Hakanan, ana gudanar da ƙarin gwaje-gwaje kamar gwajin rediyo, gwajin ultrasonic, gwajin macro, gwajin micro, gwajin walƙiya, gwaje-gwajen flattening, da sauransu. Takaddun kamar QAP, jadawalin jiyya na zafi, lissafin marufi, takaddun fumigation, MTC kamar yadda EN 10204/3.1b, rahoton gwaji na ɓangare na uku aka bayar.

Kauri: 6mm zuwa 300MM,

Nisa: 1500mm zuwa 4050mm,

Tsawon: 3000mm zuwa 15000mm

SA515 aji 70   Haɗin Halitta
Daraja	Mafi Girman Element (%)
	C	Mn	P	S	Si
Babban darajar SA515	0.30-0.35	1.30	0.035	0.035	0.13-0.45

Daraja	SA515 digiri 70   Kayan aikin injiniya
	Kauri	yawa	Tashin hankali	Tsawaitawa
Babban darajar SA515	mm	Min Mpa	Mpa	Min %
	200	260	485-620	17
	50			21

Gabaɗaya Bukatu da Bayanin oda

• Hanyoyin gwaji da sake gwadawa, hanyoyin;
• Haƙuri da aka halatta a cikin girma da yawa, inganci;
• Gyaran lahani;
• Alama, lodi da oda bayanai;
• Ana cire maƙarƙashiya daga wannan ƙayyadaddun yanayin idan an yanke shi zuwa nau'in faranti.

Material da Kerawa

Za a kashe karfen kuma a sanya shi zuwa babban aikin girman hatsi na austenitic.

Maganin zafi

Kaurin faranti na ASME A515 a cikin kauri 50 mm [inci 2] da ƙasa galibi ana kawo su tare da yanayin birgima, sai dai idan an yi oda kamar yadda aka nema.
Faranti sama da 50 mm [2 in] a cikin kauri za a daidaita su.

Ƙarin Fasaha:   Gwajin HIC | NACE MR0175 | Z15 | Z25 | Z35 | S1 | S2 | S3 | S4.1
S5 | S6 | S7 | S8 | S9| S11 | S12 | S17