PPGI na-ewu corrugated nchara ụlọ mpempe akwụkwọ

Ihe onwunwe	DX51D,DX52D,S350GD,S550GD
Ọkpụrụkpụ	0.13-1.0mm
Obosara	BC:650-1200mm   AC:608-1025mm
Ụdị Elu Elu	Efere dị elu (ịdị elu ebili mmiri ≥70mm), efere ebili mmiri ọkara (ịdị elu nke ebili mmiri <70mm) na efere ebili mmiri dị ala (ịdị elu ebili mmiri <30mm)
Ụdị mpempe akwụkwọ dabere	Galvanized ígwè mpempe akwụkwọ; galvalume ígwè mpempe akwụkwọ; PPGI; PPGL
Ogologo	1m-6m
Ibu ibu	2-4 metric ton
Nkwakọ ngwaahịa	Mbupu ọkọlọtọ ọkọlọtọ ma ọ bụ dị ka ndị ahịa chọrọ
Mbupu	N'ime 10-15 workdays, 25-30 ụbọchị (MOQ ≥1000MT)

Njirimara
1.Fire Nguzogide
Mkpuchi, ọkụ na-eguzogide larịị nke metal isi efere ruru A.
2.Corrosion Resistance
A na-anabata ya nke ọma na Acid-Bases ma  ọ nwere ike izute ihe nguzogide nnu nnu nke ụlọ ọnụ ahịa chọrọ.
3.Heat mkpuchi
Igwe ọkụ na-egbuke egbuke na-eme ka elu nke ngwaahịa ahụ ghara ịmị ọkụ, ọbụna n'oge okpomọkụ, elu osisi anaghị ekpo ọkụ, nke na-ebelata okpomọkụ na ụlọ ahụ site na 6-8 degrees.

PPGI bụ ígwè galvanized agba agba agba, nke a makwaara dị ka nchara kpuchiri ya, agba agba agba wdg.
Iji Hot Dip Galvanized Steel Coil dị ka mkpụrụ, a na-eme PPGI site na mbụ ịga na pretreatment elu, mgbe ahụ mkpuchi nke otu ma ọ bụ karịa n'ígwé nke mmiri mmiri mkpuchi site mpịakọta mkpuchi, na n'ikpeazụ ịsa na jụrụ. Ihe mkpuchi ndị a na-eji gụnyere polyester, silicon modified polyester, elu-adịgide adịgide, corrosion-resistance na formability.

Ngwa:
N'èzí: elu ụlọ, ihe owuwu ụlọ, elu mpempe akwụkwọ nke mbara ihu, etiti windo, ọnụ ụzọ, ọnụ ụzọ ebe a na-adọba ụgbọala, ọnụ ụzọ mkpuchi rola, ụlọ ntu, ihe mkpuchi Persian, cabana, ụgbọ ala refrigerated na ihe ndị ọzọ. Ime ụlọ: ọnụ ụzọ, iche iche, etiti ọnụ ụzọ, ìhè ígwè Ọdịdị nke ụlọ, sliding ụzọ, mpịachi ihuenyo, uko ụlọ, esịtidem mma nke ụlọ mposi na mbuli elu.

Ajụjụ gbasara PPGI / PPGL
Q: Gịnị bụ uru nke GL tụnyere ndị ọzọ ígwè?
A: Ihe mkpuchi alu na zinc na-enyere ígwè ahụ aka ịrụ ọrụ mgbochi corrosion ka mma yana ọnụ ahịa akụ na ụba.

Ajụjụ: Gịnị bụ ọtụtụ ojiji nke galvanized ígwè?
A: ọkpụrụkpụ 0.13mm-0.50mm ígwè bụ ewu ewu maka roofing, 0.60-3.0mm ígwè ewu ewu maka deforming na decking.

Ajụjụ: Gịnị bụ ngwugwu mbupu?
A: Ngwungwu mmiri kwesịrị ekwesị gbakwunyere n'ime akpa ume, anya na mgbidi / anya na mbara igwe nwere pallet osisi dị maka nhọrọ.