1.2083 ígwè | X42Cr13

1.2083 ígwè | X42Cr13 | SUS420J2 | X40Cr14 | 2314 | 17029 | 420S37 | X12 | 420 Plastic Mold Steel gbanwere
DIN 1.2083 bụ ụdị igwe anaghị agba nchara chrome Plastic Mold Steel. German anwụ ígwè 1.2083 bụ chromium ọdịnaya ruo 13% nke plastic anwụ ígwè. 1.2083 ebu ígwè nwere ezigbo polishing na magburu onwe eyi nguzogide, a na-ejikarị egbochi acid plastic ebu. Special Steel China Supplier and factory -Gnee ọkọnọ 1.2083 steels na gburugburu mmanya, efere, flat bar, square, ngọngọ na ndị ọzọ ọ bụla udi.

DIN 1.2083 ígwè bụ chromium alloyed igwe anaghị agba nchara plastik ebu ígwè. Ọ dabara na AISI 420 ígwè. Nchara 1.2083 bụ isi nchara maka ịpị ọkụ na mgbasa.

1.2083 igwe anaghị agba nchara na-enyekarị ọnọdụ annealed na ike <230HB. Enwere ike ibunye ya ESR wee menyụọ na iwe ọkụ ruo 320 HB.

Isi njirimara DIN 1.2083 bụ:

- ezigbo ikuku corrosion eguzogide;

- ezigbo polishability,

- arụ ọrụ dị mma n'ọnọdụ annealed,

– a elu hardenability

– ezigbo eyi iguzogide

Ngwakọta kemịkalụ nke 1.2083 igwe anaghị agba nchara- Igwe anaghị agba nchara

ASTM A681	C	Si	Mn	P	S	Cr
420 gbanwere	≤1.00	≤1.00	0.20～0.40	0.030 Max	0.030 Max	12.5～13.5
DIN 17350	C	Si	Mn	P	S	Cr
1.2083 / X42Cr13	≤1.00	≤1.00	0.20～0.40	0.030 Max	0.030 Max	12.5～13.5
GB /T 9943	C	Si	Mn	P	S	Cr
4Cr13	0.35～0.45	≤0.60	≤0.80	0.030 Max	0.030 Max	12.0～14.0
JIS G4403	C	Si	Mn	P	S	Cr
SUS420J2	0.26～0.40	≤1.00	≤1.00	0.030 Max	0.030 Max	12.0～14.0

1.2083 Ihe dakọtara na nkọwapụta

USA	German	Japan	China	ISO
ASTM A681	DIN 17350	JIS G4403	GB /T 9943	ISO 4957
420 gbanwere	1.2083 /X42Cr13	SUS420J2	4Cr13	X42Cr13

---

DIN W-N r 1.2083 Ihe eji eme ihe eji eme ihe

Na-agbasi mbọ ike mgbe oke iwe ọkụ /MPa | 400 ℃: 1910

Na-agbasi mbọ ike mgbe oke iwe ọkụ /MPa | 500 ℃: 1860

Na-agbasi mbọ ike mgbe oke iwe ọkụ /MPa | 600 ℃: 1130

Na-agbasi mbọ ike mgbe oke iwe ọkụ /MPa | 650 ℃: 930

---

Mgbanwe nke 1.2083

Pre-Heating ka 600 ℃, Mgbe ahụ, okpomọkụ ka ekwuru okpomọkụ. Sook na 800-1100C, hụ na ikpo ọkụ nke ọma. Mgbe ahụ na-amalite adịgboroja, na adịgboroja okpomọkụ adịghị ala karịa 650 ℃. Mgbe i mechachara, jiri nwayọ nwayọ.

---

Ọgwụgwọ okpomọkụ nke DIN 1.2083 Plastic Steel

• 1.2083 Mkpebi

Ji nwayọọ nwayọọ na-ekpo ọkụ na 750-800 ℃, mgbe ahụ, jiri nwayọọ nwayọọ Cools ka 538 ℃ (1000 ℉) na okpomọkụ ọgwụgwọ ọkụ. Mgbe ahụ dị jụụ na ikuku. Mgbe ikesachara ike HBS: 225 Max

• Din W-Nr 1.2083 ike

1.2083 ígwè nwere ike dị elu ma kwesị isi ya site na jụrụ oyi na ikuku. Iji bath nnu ma ọ bụ ọkụ ikuku a na-achịkwa bụ ihe na-achọsi ike iji belata nbibi, ma ọ bụrụ na ọ dịghị, a na-atụ aro ka a na-akwakọba hardening na pitch coke.

• Nkwụsị nke igwe anaghị agba nchara 1.2083 ihe

Okpomọkụ na-emenyụ / ℃: 1020 ~ 1050

Ihe na-emenyụ ọkụ: mmanụ jụrụ oyi

Ike: 50 HRc

• Ọnụ ego nke 1.2083

Okpomọkụ na-ekpo ọkụ / ℃: 200-300

Mgbe ike gwụrụ HRC ma ọ bụ karịa: 28-34 HRc

---

Ngwa nke Din X42Cr13 W-Nr 1.2083

1.2083 dabara adaba maka ọrụ mbuze ọkụ eletrik, dabara adaba maka akwa plastik na-egbuke egbuke acid na ihe achọrọ. A na-ejikarị eme ihe na mmepụta nke PVC ebu, wearability na na-ejuputa ebu, gụnyere ụdị ọkụ siri ike nke plastik, ogologo ndụ ebu, dị ka: ihe mkpofu tableware ebu, ngwa anya components mmepụta, dị ka igwefoto, na ugogbe anya anwụ, ọgwụ containers. na wdg.

---

Ekwadoro ogo nke X42Cr13 /1.2083

Ogo nke ISO 9001: 2008 njikwa njikwa mma kwadoro. Anyị niile 2083 ígwè niile nwere site SEP 1921-84 ultrasonic inspection (UT Test). Ogo ogo: E/e, D/d, C/c.

Ọ bụrụ na ị nwere ajụjụ 1.2083 ígwè na ajụjụ maka ọnụahịa, ngwa, ọgwụgwọ ọkụ, Biko egbula oge ịkpọtụrụ anyị.