30CrMnSiA inopisa yakakungurutswa simbi pepa

Alloy structural simbi imhando yesimbi iyo inoshandiswa semechini zvikamu uye akasiyana einjiniya zvikamu, zvine chinhu chimwe kana anopfuura alloy.
30CrMnSiA ikati kabhoni ine simba rakawanda uye kusashanda zvakanaka kwewelding.
30CrMnSiA ine simba repamusoro uye kusimba kwakakwana mushure mekudzima uye kudziya, uye kuoma zvakare kwakanaka. Mushure mekudzima uye kupisa, zvinhu zvacho zvinogona kushandiswa segumbo rekukuya shaft, magiya uye sprockets.
30CrMnSiA ine yakanaka processability, diki yekugadzirisa deformation uye yakanaka kuneta kuramba. Kune shaft uye piston zvikamu uye zvichingodaro. Inoshandiswa muzvikamu zvakasiyana-siyana zvekupfeka zvakadai semotokari uye ndege.
Izvo zvinhu zvakasviba muruvara uye galvanized zvinogona kuwedzera aesthetics uye ngura.

KUPIWA RANGE YE GB/T 30CrMnSiA

-Dimension: Diameter 4-1600 mm, chero hurefu huri pasi pe16 metres

-Delivery Conditions:

Kutonhora kunotorwa: 4-100 mm

Yakabviswa: 30-160 mm

Yakakuya: 4- 600 mm

Kutendeuka: 130-1200 mm

Kupisa kwakatenderedzwa: 12-320 mm

Kupisa kwakagadzirwa: 130-1600 mm

-EAF+(ESR) kana EAF+LF+VD+(ESR)

-HOT yakakungurutswa; Cold rolled; Forged; Cold Drawn

-Kupisa Kurapa: Kusarapwa, Annealing, N+T, Q+T

-Kunyungudutsa: EAF+LF+VD (+ESR)

-Surface Finish: Dema, Yakakasharara Yakagadzirwa, Yakapepetwa, Yakatenderedzwa kana pakukumbira

-UT 100% yakapfuura

-Kucheka sevhisi yakapihwa

-Kuongorora kweBato rechitatu kunogamuchirwa (SGS, BV nezvimwewo)

Giredhi	C	Si	Mn	P	S	Ni	Cr	Cu
30CrMnSiA	0.28- 0.34	0.90- 1.20	0.80- 1.10	0.025 max	0.025 max	≤ 0.40	0.80- 1.10	≤ 0.25

Mechanical properties

Goho simba σs/MPa (>=)	Kusimba simba σb/MPa (>=)	Elongation δ5/% (>=)	Kuderedzwa kwe nzvimbo ψ/% (>=)	Impact inotora simba Aku2/J (>=)	Kuoma HBS 100/3000 max
835	1080	10	45	39	229

APPLICATIONS
Kukuya vhiri shaft, magiya uye sprockets
Special waer zvikamu zvemotokari uye ndege
Mhando dzematurusi ane chimiro chekucheka
Shaft uye piston zvikamu

Hunhu Hwakanaka

Pazasi kuongororwa kuchaitwa mukugadzirwa.
(1) kuona kwemwaranzi---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) kuedza kupinda-PT;
(5) eddy ikozvino kukanganisa kukanganisa-ET