NM450 ea tšepe e sa keneleng ho roala

NM450 ea tšepe e hananang le ho roala ke mefuta e phahameng e manganga e phahameng, e nang le seha se setle, se kobehang, se sebetsang hantle. Sehlahisoa sa mofuta ona se etselitsoe lifeme tsa thepa ea lapeng tse amoheloang hantle ka bongata e le sebaka sa lipoleiti tse theko e boima tse tsoang kantle ho naha.

M e "apareha" ka hare ho "sila" alfabeta ea fonotiki ea pele.450 Brinell hardness HB value. (450 hardness ke bophara bo pharaletseng, lehae la NM450 boima ba bohlokoa ke round 450). Katalor phepelo ea NM450 beha poleiti ea tšepe e manganga ka theko e ntle le boleng.

Boemo ba poleiti ea tšepe bo na le ts'usumetso e ntle ka ho fetesisa le ts'ebetso ea welding ntle le khaello ea matla. Ke tekanyetso ea tšepe ea lapeng naheng ea China bakeng sa ho etsa li-Excavator, li-loaders, bulldozers bucket plate, blade board, facet edge plate.

NM450 e kentsoeng ka poleiti ea tšepe e hanyetsanang e sebelisoa haholo lisebelisoa tsa boenjiniere, lisebelisoa tsa merafo, lisebelisoa tsa merafo ea mashala, mechine ea tšireletso ea tikoloho, lisebelisoa tsa metallurgical, lisebelisoa tsa ho sila, li-bearings le lintho tse ling.

GBT24186 NM450 matla a phahameng a abrasion manganga lipoleiti tsa tšepe haholo-holo li fana ka tšireletso bakeng sa liketsahalo kapa likarolo tse lokelang ho se sebetse.

Mophato o kopane le thepa e ntle ea ho hanyetsa ho ea ho corrosion. Sena se fana ka ts'ebetso e feteletseng maemong a fokotsehang esita le mochesong o feteletseng. Lipoleiti tsa tšepe li hanela ho khopama ha ho tluoa tabeng ea ho kenya letsoho ha mocheso o ntse o eketseha.

Botenya: 5mm-120mm(ho ikhethela).

Bophara: 500mm-4000mm(ho ikhethela).

Bolelele: 1000mm-12000mm(ho ikhethela).

Profiled: Ho latela setšoantšo.

Tlhahlobo: Tlhahlobo ea lik'hemik'hale, Metallographic, Tlhahlobo ea Mechini, Teko ea Ultrasonic, Teko ea phello, Teko ea boima, boleng ba bokaholimo le tlaleho ea Dimension.

MOQ: 1pcs.

Sebaka sa Tšimoloho: Chaena.

NM450 Wear Resistant Steel Plate

Maemo a Boleng

DIN EN ISO 6506                 EN ISO6892                     EN 10045

Sebopeho sa Lik'hemik'hale(%)

Kereiti ea tšepe	C	Si	Mong	P	S	Kr	Ni	Mo	B
NM360	0.17 max	0.50 max	1.50 max	0.025 boholo	0.015 boholo	0.70 boholo	0.50 max	0.40 boholo	0.005 boholo
NM400	0.24 boholo	0.50 max	1.60 max	0.025 boholo	0.015 boholo	0.40-0.80	0.20-0.50	0.20-0.50	0.005 boholo
NM450	0.26 boholo	0.70 boholo	1.60 max	0.025 boholo	0.015 boholo	1.50 max	1.00 max	0.50 max	0.004 boholo
NM500	0.38 boholo	0.70 boholo	1.70 max	0.020 max	0.010 max	1.20 max	1.00 max	0.65 boholo	0.005-0.006

Boemo ba thomello

Q+T(E timisitsoe ebile e halefile)

Thepa ea Mechini

Kereiti ea tšepe	Y.S (MPa)	T.S (MPa)	Elongation A5(%)	Teko ea Tšusumetso		Ho thatafala
	min	min	min	(°C)	AKV J(mots)	HBW
NM360	800	1000	10	-20	30	320-400
NM400	1000	1250	10	-20	30	360-440
NM450	1250	1500	10	-20	30	410-490
NM500	1300	1700	10	-20	30	450-540

Bokhoni: 3,000 ton ka khoeli.

Teko: Tlhahlobo ea lik'hemik'hale, Metallographic, Mechnical analysis, Ultrasonic Test, Impact Test, Hardness, Surface and Dimension report.

Sephutheloana

Lengata kapa sengoathoana.

Setifikeiti sa Teko sa Mill

EN 10204/3.1 e nang le lintlha tsohle tse amehang. lik'hemik'hale. tlhamo, mech. thepa le liphetho tsa teko.

Kopo

Apara manganga (abrasion manganga) poleiti ea tšepe ke lisebelisoa tse matla tsa tšepe bakeng sa ho se mamelle, tse sebelisoang haholo maemong a mabe a ho sebetsa, tse batloang ka matla a phahameng, ts'ebetso e phahameng e hanyetsanang le boenjiniere, meepo, kaho, temo, boema-kepe le lihlahisoa tsa mochini oa metallurgical. Ka hona, ho rarolla mathata le ho lelefatsa bophelo bo sebelisitsoeng ba lisebelisoa tsa mochini le likarolo e ba ntho ea pele eo ho nahanoang ka eona mabapi le ho qapa, ho etsa le ho sebelisa. Mechini e kenyang, li-dredgers, likoloi tse tsamaisang limela, literaka tse tsamaisang thepa, literaka tsa ho lahlela, lithapo, lithipa, li-breaker, li-crusher, li-feeders, lipokotho tse lekanyang, limakasine, libakete, likere, li-sprockets, literaka tsa indasteri, lilori, li-bulldozers, lipeipi tse epang, litsamaiso, li-screw conveyors, li-presses joalo-joalo.