I-JIS-SMA400AW intsimbi

I-SMA400AW yintsimbi exhathisayo kwimozulu eyenziwe nge-alloying copper, chromium kunye nenickel. I-SMA400AW yongeze iphosphorous eyenza i-matariya ifaneleke ngcono usetyenziso lwerhasi flue kunye ne-aesthetic facias.
I-China CNS SMA400AW I-China I-Taiwan ye-Structural steel kunye ne-SMA400AW i-Mechanical Properties, i-Chemical Element, i-Cross Reference, i-Datasheet.
SMA400AW Iinkcukacha Zobugcisa:
Ukunyangwa koBushushu: Kuqhelekileyo, kucinywe, kunomsindo, i-HIC, uVavanyo lweMpembelelo, (Ngokuzikhethela ukuba akubonelelwanga kwimigaqo)

Iinkcukacha:
Ukutyeba: 3mm--150mm
Ububanzi: 30mm--4000mm
Ubude: 1000mm--12000mm
Umgangatho: ASTM EN10025 JIS GB

I-JIS G3114 SMA400AW Ukubunjwa kweMichiza kunye nePropati yeMechanical:
Ipropathi yomatshini yentsimbi ye-SMA400AW yeCorten:

Ukutyeba (mm)
SMA400AW	≤ 16	> 16 ≤ 40	> 40 ≤ 75	> 75 ≤ 100	> 100 ≤ 160	> 160
Amandla esivuno (≥Mpa)	245	235	215	215	205	195
Amandla okuqina (Mpa)	400-540

Ukwakhiwa kwemichiza ye-SMA400AW Corten steel (Ladle Analysis Max%)

Ukuqulunqwa kwezinto eziphambili zeekhemikhali ze-SMA400AW
C	Si	Mnu	P	S	Cu	Cr	Ni
0.18	0.15-0.65	1.25	0.035	0.035	0.30-0.50	0.45-0.75	0.05-0.30

SMA400AW iMeko eyongezelelweyo:
I-UT (Uviwo lwe-Ultrasonic), i-AR(Njengokuba i-Hot Rolled kuphela), i-TMCP(i-Thermal Mechanical Control Processing), i-N(Eqhelekileyo), i-Q+T(Icinyiwe kwaye inomsindo), uvavanyo lwe-Z Direction (Z15,Z25,Z35), i-Charpy V- Uvavanyo lweMpembelelo ye-Notch, uvavanyo lwe-HIC, i-NDT, i-PWHT (i-Simulated Post Weld Heat Treatment), i-NACE0175, Uvavanyo lweQela lesithathu (njenge-SGS Test), i-Coated okanye i-Shot Blasting kunye ne-Painting.

Nxulumanisa Uhlobo lweNsimbi

Uhlobo lwentsimbi	Umgangatho	Ikhowusi yelizwe	C(%)	V(%)	Si(%)	Mn(%)	P(%)	S(%)	Cr(%)	Ni(%)	Cu(%)
SMA400AW	4269	CNS	≦0.18		0.15-0.65	≦1.25	≦0.035	≦0.035	0.45-0.75	0.05-0.30	0.30-0.50
SMA400AW	G3114	I-JIS	≦0.18		0.15-0.65	≦1.25	≦0.035	≦0.035	0.45-0.75	0.05-0.30	0.30-0.50
I-A588Gr.C	A588	I-ASTM	≦0.15	0.01-0.10	0.15-0.40	0.80-1.35	≦0.04	≦0.05	0.30-0.50	0.25-0.50	0.20-0.50

Uhlobo lwentsimbi	Uxinzelelo lwesivuno (Mpa)	Uxinzelelo lokuqina (Mpa)	Ubude (%)	Ubukhulu (mm)
SMA400AW	≧245	400-540	≧23	≦16
SMA400AW	≧245	400-540	≧23	≦16
I-A588Gr.C	≧345	≧485		≦101.6