Imichiza kunye neMechanical
34CrNiMo6 Ukwakheka kweekhemikhali kunye neepropathi zomgangatho wentsimbi
| I-BS EN 10083 – 3:2006 |
34CrNiMo6 |
C |
Si |
Si |
P |
S |
Cr |
Mo |
Ni |
| 0.30-0.38 |
0.40 ubuninzi |
0.50-0.80 |
0.025 ubuninzi |
0.035 ubuninzi |
1.30-1.70 |
0.15-0.30 |
1.30-1.70 |
34CrNiMo6 iiPropati zeNsimbi zoomatshini
| Ububanzi (mm) |
<16 |
16~ 40 |
40~100 |
100~160 |
160 ~250 |
| Ukutyeba t (mm) |
< 8 |
8~20 |
20~60 |
60~100 |
100~160 |
| Amandla okuqina Rm (N/mm2) |
1200 - 1400 |
1100 - 1300 |
1000 - 1200 |
900 - 1100 |
800 - 950 |
| Elongation A (%) |
9 imiz |
10 imiz |
11 imiz |
Umz 12 |
13 imiz |
| Ukuncipha kwendawo Z (%) |
40Miz |
45 imiz |
50Miz |
55Miz |
55min |
| Ukuqina kwe-CVN (J) |
35Miz |
45min |
45min |
45min |
45 imiz |
| Amandla esivuno Re (N/mm²) |
1000 Min |
900 imiz |
800 imiz |
700 Min |
600 Min |
Imigangatho yentsimbi ye-EN 34CrNiMo6 kunye neMilinganiso
| I-BS EN 10083 -3: 2006 |
34CrNiMo6 / 1.6582 |
I-ASTM A29: 2004 |
4337 |
| I-BS EN 10250 – 3: 2000 |
3. EN /DIN 34CrNiMo6 iiPropati zeNsimbi zokuBunjwa kweMichiza
| I-BS EN 10083 – 3:2006 |
34CrNiMo6
/1.6582 |
C |
Mnu |
Si |
P |
S |
Cr |
Mo |
Ni |
| 0.30-0.38 |
0.5-0.8 |
0.40 ubuninzi |
0.025 ubuninzi |
0.035 ubuninzi |
1.3-1.7 |
0.15-0.30 |
1.3-1.7 |
| I-BS EN 10250-3: 2000 |
C |
Mnu |
Si |
P |
S |
Cr |
Mo |
Ni |
| 0.30-0.38 |
0.5-0.8 |
0.40 ubuninzi |
0.035 ubuninzi |
0.035 ubuninzi |
1.3-1.7 |
0.15-0.30 |
1.3-1.7 |
| I-ASTM A29: 2004 |
4337 |
C |
Mnu |
Si |
P |
S |
Cr |
Mo |
Ni |
| 0.30-0.40 |
0.6-0.8 |
0.20-0.35 |
0.035 ubuninzi |
0.040 ubuninzi |
0.70-0.90 |
0.20-0.30 |
1.65-2.00 |
4.Mechanical Properties ye-EN/DIN 34CrNiM06 / 1.6582 Intsimbi yeAlloy
| Iipropati |
<16 |
> 16 – 40 |
> 40 – 100 |
>100 – 160 |
>160 – 250 |
| Ukutyeba t [mm] |
< 8 |
8
20
60
| 100
| | | |
| Ukuvelisa amandla Re [N/mm²] |
imiz. 1000 |
imiz. 900 |
imiz. 800 |
imiz. 700 |
imiz. 600 |
| Amandla okuqina Rm [N/mm2] |
1200 - 1400 |
1100 - 1300 |
1000 - 1200 |
900 - 1100 |
800 - 950 |
| Ubude A [%] |
imiz. 9 |
imiz. 10 |
imiz. 11 |
imiz. 12 |
imiz. 13 |
| Ukuncipha kwendawo Z [%] |
imiz. 40 |
imiz. 45 |
imiz. 50 |
imiz. 55 |
imiz. 55 |
| Ukuqina kweCVN [J] |
imiz. 35 |
imiz. 45 |
imiz. 45 |
imiz. 45 |
imiz. 45 |
5.Unyango olushushu lwe-34CrNiMo6 Engineering Steel
Icinyiwe kwaye Inomsindo (Q+T) ye-34CrNiMo6 Steel
- Fudumeza i-34CrNiMo6 intsimbi ejikelezayo ngokuthe ngcembe ukuya kubushushu be-850 ° C;
- Gxila kolu bushushu buqina kwioli;
- Ubushushu ngokukhawuleza ukuba iintsimbi ze-34CrNiMo6 zifikelela kubushushu begumbi.
- Ukufudumala ngokufanayo kwiqondo lokushisa elifanelekileyo;
- Ukuhoxisa kwisithando somlilo kwaye upholile emoyeni.
- Ubushushu obuqhelekileyo bobushushu bungama-600°C okuxhomekeka kwiimfuno zokwenyani.
6.Ukwenziwa kweDIN 34CrNiMo6 / 1.6582 Steel
Ubushushu bokwenza okushushu: 1100-900oC.
7.Ubuchule beNsimbi 34CrNiMo6
Ukutshiza kwenziwa kakuhle ngale ntsimbi ye-1.6582 ye-alloy kwi-annealed or normalized and tempered condition. Inokwenziwa ngoomatshini ngazo zonke iindlela eziqhelekileyo.
8.Welding
Izinto ze-alloy zinokuthi zidibanise okanye zixhathise i-welded. Iinkqubo ze-preheat kunye ne-post heat weld kufuneka zilandelwe xa udibanisa le alloy ngeendlela ezimiselweyo.
9.Isicelo
I-EN DIN 34CrNiMo6 intsimbi isetyenziselwa ukwenza izixhobo ezifuna iplastiki elungileyo kunye namandla aphezulu. Ihlala ikhethwa ukwenza ubungakanani obukhulu kunye namalungu abalulekileyo, anje nge-axle yomatshini onzima, i-turbine shaft blade, umthwalo ophezulu weendawo zothumelo, iziqhoboshi, i-crank shafts, iigiya, kunye neendawo ezilayishwe kakhulu zokwakha iimoto njl.njl.
I-Gnee Steel inokuthenjwa ukubonelela ngobunjineli be-34CrNiMo6 iintsimbi / 1.6582 iintsimbi zobunjineli be-alloy. Nceda usixelele iimfuno zakho ezineenkcukacha kwaye ube nolona nikezelo lungcono kungekudala.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
