Barre tonde in acciaio A105 laminate a caldo

ASTM A105 copre i componenti delle flange e delle tubazioni in acciaio al carbonio forgiato per il servizio a temperatura ambiente e più elevata nei sistemi a pressione. Comprende anche raccordi per tubi, valvole e parti simili. Il peso massimo della parte forgiata prodotta secondo questo standard è di 10000 limiti (4540 kg). I pezzi fucinati più grandi possono essere conformi allo standard A 266/A266M. Questa specifica non copre le piastre tubiere ei pezzi fucinati cilindrici cavi per gli involucri dei recipienti a pressione.

Specifiche	ASTM A105, ASME SA105
Dimensioni	EN, DIN, JIS, ASTM, BS, ASME, AISI
Barre tonde in acciaio al carbonio A105	3,0 – 50,8 mm, Oltre 50,8 – 300 mm
Barre rettangolari in acciaio al carbonio A105	6,35 x 12,7 mm, 6,35 x 25,4 mm, 12,7 x 25,4 mm
Barre esagonali in acciaio al carbonio A105	AF5,8 mm–17 mm
Barre quadre in acciaio al carbonio A105	AF2mm – 14mm, AF6.35mm,9.5mm,12.7mm, 15.98mm,19.0mm, 25.4mm
Barre piatte in acciaio al carbonio A105	1/2" a 10" nella gamma di spessori da 2 mm a 150 mm,
Fine	Luminoso, polacco e nero
Lunghezza	Da 1 a 6 metri, lunghezze di taglio personalizzate
Modulo	Rotondo, quadrato, esagonale (A/F), rettangolo, billetta, lingotto, pezzo fucinato ecc.

Composizione chimica standard "grado A105".

Carbonio (massimo)	0.35
Manganese*	0.60-1.05
Fosforo (massimo)	0.035
Zolfo (massimo)	0.040
Silicio	0.10-0.35
Rame (massimo)	0.40
Nichel (massimo)	0.40
Cromo (massimo)	0.30
Molibdeno (massimo)	0.12
Vanadio (massimo)	0.08
Niobio (massimo)	0.02

Proprietà meccaniche per "Grade A105"

Resistenza alla trazione (psi) min	70.000 psi
Carico di snervamento (psi) min	36.000 psi
Allungamento in 2” (%) min	22%
Riduzione dell'area (%) min	30%
Durezza Brinell (BHN) max	187

Tabella dei pesi della barra forgiata ASTM A105

DIMENSIONI IN POLLICI	GIRARE	PIAZZA	OTTAGONO	ESAGONO	DIMENSIONI IN POLLICI	GIRARE	PIAZZA	OTTAGONO	ESAGONO
1/16	.010	.013	.011	.012	11/16	1.262	1.607	1.333	1.392
5/64	.017	.022	.018	.019	45/64	1.320	1.681	1.394	1.456
3/32	.023	.029	.024	.025	23/32	1.380	1.756	1.487	1.521
7/64	.031	.039	.033	.034	47/64	1.440	1.834	1.521	1.588
1/8	.042	.053	.044	.046	3/4	1.502	1.913	1.586	1.656
9/64	.053	.067	.056	.058	25/32	1.630	2.075	1.721	1.797
5/32	.065	.083	.069	.072	13/16	1.763	2.245	1.862	1.944
11/64	.079	.100	.083	.087	27/32	1.901	2.421	2.008	2.096
3/16	.094	.120	.099	.104	7/8	2.045	2.603	2.159	2.254
13/64	.110	.140	.116	.121	29/32	2.193	2.792	2.316	2.418
7/32	.128	.163	.135	.141	15/16	2.347	2.988	2.479	2.588
15/64	.147	.187	.155	.162	31/32	2.506	3.191	2.646	2.763
1/4	.167	.213	.176	.184	1	2.670	3.400	2.820	2.945
17/64	.188	.240	.199	.207	1-1/16	3.015	3.838	3.183	3.324
9/32	.211	.269	.223	.233	1-1/8	3.380	4.303	3.569	3.727
19/64	.235	.300	.248	.259	1-3/16	3.766	4.795	3.977	4.152
5/16	.261	.332	.275	.288	1-1/4	4.172	5.313	4.407	4.601
21/64	.288	.360	.304	.318	1-5/16	4.600	5.857	4.858	5.072
11/32	.316	.402	.334	.348	1-3/8	5.049	6.428	5.332	5.567
23/64	.345	.439	.364	.381	1-7/16	5.518	7.026	5.827	6.085
3/8	.376	.478	.397	.414	1-1/2	6.008	7.650	6.345	6.625
25/64	.408	.519	.431	.450	1-9/16	6.519	8.301	6.885	7.189
13/32	.441	.561	.466	.486	1-5/8	7.051	8.978	7.446	7.775
27/64	.475	.605	.502	.524	1-11/16	7.604	9.682	8.030	8.385
7/16	.511	.651	.540	.564	1-3/4	8.178	10.41	8.634	9.018
29/64	.548	.698	.579	.604	1-13/16	8.773	11.17	9.265	9.673
15/32	.587	.747	.620	.647	1-7/8	9.388	11.95	9.911	10.35
31/64	.627	.798	.662	.692	1-15/16	10.02	12.76	10.58	11.05
1/2	.668	.850	.705	.736	2	10.68	13.60	11.28	11.78
33/64	.710	.904	.750	.783	2-1/16	11.36	14.46	11.99	12.53
17/32	.754	.960	.796	.831	2-1/8	12.06	15.35	12.73	13.30
35/64	.799	1.017	.844	.881	2-3/16	12.78	16.27	13.49	14.09
9/16	.845	1.076	.892	.932	2-1/4	13.52	17.21	14.27	14.91
37/64	.893	1.136	.943	.985	2-5/16	14.28	18.18	15.08	15.75
19/32	.941	1.199	.994	1.038	2-3/8	15.06	19.18	15.91	16.61
39/64	.992	1.263	1.048	1.094	2-7/16	15.87	20.20	16.75	17.49
5/8	1.043	1.328	1.102	1.150	2-1/2	16.69	21.25	17.62	18.40
41/64	1.096	1.395	1.207	1.209	2-9/16	17.53	22.33	18.52	19.34
21/32	1.150	1.464	1.214	1.268	2-5/8	18.40	23.43	19.43	20.29
43/64	1.205	1.535	1.272	1.329	2-11/16	19.29	24.56	20.37	21.27

DIMENSIONI IN POLLICI	GIRARE	PIAZZA	OTTAGONO	ESAGONO	DIMENSIONI IN POLLICI	GIRARE	PIAZZA	OTTAGONO
2-3/4	20.19	25.71	21.33	22.27	6	96.13	122.4	101.5
2-3/16	21.12	26.90	22.31	23.29	6-1/16	98.15	125.0	103.6
2-7/8	22.07	28.10	23.31	24.34	6-1/8	100.2	127.6	105.8
2-5/16	23.04	29.34	24.33	25.41	6-3/16	102.2	130.2	108.0
3	24.03	30.60	25.38	26.50	6-1/4	104.3	132.8	110.2
3-1/16	25.05	31.89	26.45	27.62	6-5/16	106.4	135.5	112.4
3-1/8	26.08	33.20	27.54	28.76	6-3/8	108.5	138.2	114.6
3-3/16	27.13	34.55	28.65	29.92	6-7/16	110.7	140.9	116.9
3-1/4	28.21	35.91	29.79		6-1/2	112.8	143.7	119.1
3-5/16	29.30	37.21	30.94		6-9/16	115.0	146.4	121.4
3-3/8	30.42	38.73	32.12		6-5/8	117.2	149.2	123.8
3-7/16	31.55	40.18	33.32		6-11/16	119.4	152.1	126.1
3-1/2	32.71	41.6	34.54		6-3/4	121.7	154.9	128.5
3-9/16	33.90	43.15	35.79		6-13/16	123.9	157.8	130.9
3-5/8	35.09	44.68	37.07		6-7/8	126.2	160.7	133.3
3-1/16	36.31	46.23	38.34		6-15/16	128.5	163.6	135.7
3-3/4	37.55	47.81	39.65		7	130.9	166.6	138.2
3-3/16	38.81	49.42	40.99		7-1/16	133.2	169.6	140.7
3-7/8	40.10	51.05	42.34		7-1/8	135.6	172.6	143.2
3-5/16	41.40	52.71	43.72		7-3/16	138.0	175.6	145.7
4	42.73	54.40	45.12		7-1/4	140.4	178.7	148.2
4-1/16	44.07	56.11	46.54		7-5/16	142.8	181.8	150.8
4-1/8	45.44	57.85	47.98		7-3/8	145.2	184.9	153.4
4-3/16	46.83	59.62	49.45		7-7/16	147.7	188.1	156.0
4-1/4	48.23	61.41	50.93		7-1/2	150.2	191.3	158.6
4-5/16	49.66	63.23	52.44		7-5/8	155.3	197.7	164.0
4-3/8	51.11	65.08	53.98		7-3/4	160.4	204.2	169.4
4-7/16	52.58	66.95	55.53		7-7/8	165.6	210.9	174.9
4-1/2	54.08	68.85	57.10		8	170.9	217.6	180.5
4-9/16	55.59	70.78	58.70		8-1/4	181.8	230.9	192.0
4-5/8	57.12	72.73	60.32		8-1/2	192.9	245.7	203.8
4-1/16	58.68	74.71	61.96		8-3/4	204.4	259.6	215.8
4-3/4	60.25	76.71	63.63		9	216.3	275.4	228.4
4-3/16	61.85	78.75	65.32		10	267.0	340.0	282.0
4-7/8	63.46	80.80	67.02		11	323.1	411.4	341.2
4-5/16	65.10	82.89	68.75		12	384.4	489.6	406.1
5	66.76	85.00	70.50		13	451	575	476
5-1/16	68.44	87.14	72.27		14	523	666	552
5-1/8	70.14	89.30	74.07		15	601	765	634
5-3/16	71.86	91.50	75.89		16	684	871	721
5-1/4	73.60	93.71	77.72		17	772	982	814
5-5/16	75.36	95.96	79.59		18	865	1102	912
5-3/8	77.15	98.23	81.47		19	964	1227	1017
5-7/16	78.95	100.5	83.38		20	1068	1360	1127
5-1/2	80.78	102.9	85.30		21	1177	1499	1242
5-9/16	82.62	105.2	87.25		22	1292	1645	1363
5-5/8	84.49	107.6	89.23		23	1412	1798	1490
5-1/16	86.38	110.0	91.22		24	1538	1958	1622
5-3/4	88.29	112.4	9323		25	1669	2125	1760
5-3/16	90.22	114.9	95.27		26	1805	2298	1904
5-7/8	92.17	117.4	97.33		27	1946	2478	2053
5-5/16	94.14	119.9	99.41		28	2093	2665	2208

Applicazione della barra tonda ASME SA105

• Compagnie di trivellazione petrolifera off-shore
• Produzione di energia
• Petrolchimico
• Lavorazione del gas
• Prodotti chimici speciali
• Prodotti farmaceutici
• Attrezzatura farmaceutica
• Attrezzature chimiche
• Attrezzature per l'acqua di mare
• Scambiatori di calore
• Condensatori
• Industria della pasta di legno e della carta