DC01-DC07 Cold Rolled Steel Coil

1. Standard: EN10130, EN10268, JIS G3141, JIS G3135, Q/TB303, Q/HG031, joalo-joalo.
2. Sehlopha: DC01-DC07, SPCC-SPCE, ST12-ST17, STKM 11A, CR220IF, HC340LA, 590DP, 220P1, CR220BH, CR420, joalo-joalo.
3. Botenya: 0.18mm - 3.5mm.
4. Bophara: 600mm - 2080mm.
5. Coil ID: 508mm/610mm.
6. Boima ba Coil: Ho ea ka litlhoko tsa bareki.

Karolelano	Tlhaloso	Kereiti e tloaelehileng	Standard
Koloi	Tšepe ea k'habone e tlase, setšoantšo se tebileng sa IF tšepe, matla a phahameng IF tšepe, tšepe e matla e tlase, tšepe ea mekhahlelo e 'meli, tšepe e thata ea ho baka, tšepe ea TRIP	DC01-DC06 CR220IF HC340LA 590DP 220P1 CR220BH CR420, STKM 11A	EN10130 EN10268 JIS G 3141 JIS G 3135 Q/TB303 Q/HG031
Sesebelisoa sa Lehae	Tšepe e tlase ea khabone, tšepe ea IF, tšepe e bolailoeng ke Al-	DC01-DC06 SPCC-J1 SPCC-J2 SPCD SPCE	Q/HG 009 EN10130 JISG3141 GB/T 5213 ASTMA1008M
Sepheo se Ikgethileng	Flux cored welding wire slideway steel, letlapa la tšepe bakeng sa tšepe ea ketane ea tšireletso	TYH THD SPCC-SC TLA	2016JX (027) JT010-2013 Letlapa la khoebo Letlapa le tlaase la carbon SPCC DC01 Q/HG006 EN10130 GB/T5213-2008
Tsa khoebo	Tšepe e tlaase ea carbon	SPCC DC01	Q/HG006 EN10130 GB/T5213-2008

Li-coil tse nang le serame ke sehlahisoa sa tšepe se hlahisoang ka ho sebelisa deformation ea polasetiki ho tšepe e chesang e chesang holim'a liloala tse batang. Ka ts'ebetso e joalo, sehlahisoa se ka ba le mamello e nepahetseng haholoanyane, boleng bo botle ba holim'a metsi le thepa e ntlafalitsoeng ea mochini ha e bapisoa le li-coil tse kentsoeng ka hot. Cold rolling e boetse e sebelisoa ho etsa likhoele tse tšesaane ho feta liloala tse chesang tse ka hlahisoang hajoale (ka tlase ho 0.8-1.0 mm).

Letlapa la tšepe le batang la DC01 le sebelisoa haholo bakeng sa sebopeho se akaretsang le ho sebetsa sehatsetsing le lisebelisoa tse ling tsa ntlo lihele, meqomo ea oli, thepa ea ka tlung ea tšepe.

LBH

P: Na u khoebo ea k'hamphani kapa moetsi?
A: Re k'hamphani ea khoebo e nang le phihlelo ea lilemo tse fetang 15 khoebong ea ho romela thepa ea tšepe, re na le tšebelisano-'moho ea nako e telele le mechine e meholo ea Chaena.

P: Na u tla tlisa thepa ka nako?
A: E, re tšepisa ho fana ka lihlahisoa tsa boleng bo holimo le ho fana ka thepa ka nako .Botšepehi ke molao oa k'hamphani ea rona.

P: O fana ka mehlala? na ke mahala kapa ho feta?
A: Mohlala o ka fa moreki mahala, empa thepa ea li-courier e tla koaheloa ke akhaonto ea bareki.

P: Na u amohela tlhahlobo ea motho oa boraro?
A: E, re amohela ka botlalo.

P: Lihlahisoa tsa hau tse ka sehloohong ke life?
A: Tšepe ea carbon, tšepe ea motsoako, poleiti ea tšepe e sa hloekang / coil, phala le lisebelisoa, likarolo joalo-joalo.

Q: Na o ka amohela odara ea customzied?
A: Ee, re a tiisa.