1.2083 Ke kila | X42Cr13

1.2083 Ke kila | X42Cr13 | SUS420J2 | X40Cr14 | 2314 | 17029 | 420S37 | X12 | 420 Hoʻololi ʻia ʻo Plastic Mold Steel
ʻO DIN 1.2083 ka mea maʻamau ʻo Stainless Chrome Plastic Mold Steel. ʻO ke kila make German 1.2083 he mea chromium a hiki i ka 13% o ke kila make plastic. ʻO ka 1.2083 mold steel he polishing maikaʻi a me ke kūpaʻa maikaʻi loa, hoʻohana pinepine ʻia e pale i ka ʻakika plastic mold. Mea Kūʻai Kūʻai Kūikawā Kina a me ka hale hana -Gnee hoʻolako i nā kila 1.2083 i loko o ka pahu pōʻai, ka pā, ka pā pālahalaha, ka square, ka poloka a me nā ʻano like ʻole.

ʻO DIN 1.2083 kila ʻo ia ka chromium i hoʻohui ʻia i ke kila kila kila. Ua like ia me ke kila AISI 420. ʻO ke kila 1.2083 he mau kila nui no ka paʻi wela i ke kahe.

ʻO 1.2083 ke kila kuhiliʻole ke hāʻawi maʻamau i ke kūlana annealed me ka paʻakikī <230HB. Hiki ke hāʻawi ʻia iā ESR a hoʻopau ʻia a hoʻonāukiuki ʻia i 320 HB.

ʻO nā hiʻohiʻona nui o DIN 1.2083:

- ke kū'ē i ka corrosion maikaʻi,

- kahi polishability maikaʻi loa,

- kahi machinability maikaʻi i ke kūlana annealed,

- he paʻakikī kiʻekiʻe

- kahi pale lole maikaʻi

Huina Kemika o 1.2083 Mea Kinohi Pilikino- Plastic Mold Steel

ASTM A681	C	ʻO Si	ʻO Mn	P	S	Cr
420 Hoololiia	≤1.00	≤1.00	0.20～0.40	0.030 Max	0.030 Max	12.5～13.5
DIN 17350	C	ʻO Si	ʻO Mn	P	S	Cr
1.2083/ X42Cr13	≤1.00	≤1.00	0.20～0.40	0.030 Max	0.030 Max	12.5～13.5
GB/T 9943	C	ʻO Si	ʻO Mn	P	S	Cr
4Cr13	0.35～0.45	≤0.60	≤0.80	0.030 Max	0.030 Max	12.0～14.0
JIS G4403	C	ʻO Si	ʻO Mn	P	S	Cr
SUS420J2	0.26～0.40	≤1.00	≤1.00	0.030 Max	0.030 Max	12.0～14.0

1.2083 Mea Kaulike a me na mea pili

USA	Alemania	Iapana	Kina	ISO
ASTM A681	DIN 17350	JIS G4403	GB/T 9943	ISO 4957
420 Hoololiia	1.2083/X42Cr13	SUS420J2	4Cr13	X42Cr13

---

DIN W-N r 1.2083 Mea Mechanical Mea

ʻO ka paʻakikī ma hope o ka hoʻoulu ʻana i ka waiwai/MPa | 400 ℃.: 1910

ʻO ka paʻakikī ma hope o ka hoʻoulu ʻana i ka waiwai/MPa | 500 ℃ : 1860

ʻO ka paʻakikī ma hope o ka hoʻoulu ʻana i ka waiwai/MPa | 600 ℃ : 1130

ʻO ka paʻakikī ma hope o ka hoʻoulu ʻana i ka waiwai/MPa | 650 ℃ : 930

---

Kuhi ʻia o 1.2083

Pre-Heating i ka 600 ℃， A laila wela i ka mahana wela. Hoʻomoʻa i ka 800-1100 ° C, e hōʻoia i ka wela. A laila hoʻomaka i ka hana ʻana, ʻaʻole haʻahaʻa ka mahana i hoʻopaʻa ʻia ma mua o 650 ℃. Ma hope o ka hana ʻana, e hoʻomaha mālie.

---

ʻO ka hoʻomaʻamaʻa wela o DIN 1.2083 kila kila

• 1.2083 Hoʻopili

E wela mālie i ka 750-800 ℃, a laila hoʻolili mālie i ka 538 ℃ (1000 ℉) i ka umu wela. A laila e hoʻolili i ka ea. Ma hope o ka hoʻopili ʻana i ka paʻakikī HBS: 225 Max

• Din W-Nr 1.2083 Paakiki

1.2083 kila he kiʻekiʻe loa ka paʻakikī a pono e hoʻopaʻakikī ʻia e ka hoʻolili ʻana i ka ea. Makemake ʻia ka hoʻohana ʻana i ka ʻauʻau paʻakai a i ʻole ka umu ahi e hoʻomalule ʻia e hōʻemi i ka decarburization, a inā ʻaʻole i loaʻa, manaʻo ʻia ka paʻakikī paʻa i loko o ka pitch coke.

• Ke kinai ʻana i nā mea ʻeleʻele 1.2083

Ke ana wela / ℃ : 1020~1050

Mea hoʻonanea: ʻaila hoʻolili

Ka paakiki: 50 HRc

• ʻO ka hoʻonā ʻana o 1.2083

Ka wela wela / ℃ : 200-300

Ma hope o ka paʻakikī HRC a ʻoi aku paha: 28-34 HRc

---

Noi o Din X42Cr13 W-Nr 1.2083

He kūpono ka 1.2083 no ka hana hoʻoheheʻe uila, kūpono no ka waika maikaʻi polishing mold plastics a me nā koi. Hoʻohana nui ʻia i ka hana ʻana i ka mold PVC, ka lole a me ka hoʻopiha ʻana i ka mold, me ke ʻano paʻakikī paʻakikī o ka mold plastic, ka lōʻihi o ke ola ʻana, e like me: disposable tableware mold, optical component production, e like me ka kamera, a me nā aniani, nā ipu lāʻau. a pela aku.

---

ʻIke ʻia ka maikaʻi o X42Cr13/1.2083

Hōʻoia ʻia e ISO 9001: 2008 ʻōnaehana hoʻokele maikaʻi. ʻO kā mākou kila 2083 a pau i loaʻa iā SEP 1921-84 ultrasonic inspection (UT Test). Papa Kūlana: E/e, D/d, C/c.

Inā loaʻa iā ʻoe kekahi nīnau hao 1.2083 a me ka nīnau no ke kumukūʻai, noi, mālama wela, e ʻoluʻolu e hoʻokaʻaʻike mai iā mākou.