1.2083 Tšepe | X42Cr13

1.2083 Tšepe | X42Cr13 | SUS420J2 | X40Cr14 | 2314 | 17029 | 420S37 | X12 | 420 Modified Plastic Mold Steel
DIN 1.2083 ke tšepe e tloaelehileng ea Stainless Chrome Plastic Mold. Jeremane die steel 1.2083 ke chromium content ho fihlela ho 13% ea polasetiki die steel steel. 1.2083 tšepe ea hlobo e na le polishing e ntle le e ntle ka ho fetisisa ea ho apara, e atisa ho sebelisoa ho thibela hlobo ea polasetiki ea acid. Special Steel China Supplier le fektheri -Gnee phepelo ea 1.2083 litšepe ka bareng e chitja, poleiti, flat bar, square, block le ba bang leha e le efe sebopeho.

DIN 1.2083 steel ke chromium alloyed stainless plastic hlobo steel. E lekana le tšepe ea AISI 420. Tšepe 1.2083 ke litšepe tse kholo bakeng sa ho hatelloa ha mocheso ho potoloha.

1.2083 tšepe e sa hloekang hangata e fanoa ka boemo ba annealed ka boima ba <230HB. E ka boela ea fanoa ka ESR 'me ea tima le ho belisoa ho 320 HB.

Litšobotsi tsa mantlha tsa DIN 1.2083 ke:

- ho hanyetsa kutu e ntle ea sepakapaka,

- boleng bo botle,

- ts'ebetso e ntle ea machane maemong a sithabetsang,

- boima bo phahameng

- ho hanyetsa ho apara hantle

Sebopeho sa Lik'hemik'hale sa 1.2083 Stainless Steel Material- Plastic Mold Steel

ASTM A681	C	Si	Mong	P	S	Kr
420 Fetotse	≤1.00	≤1.00	0.20～0.40	0.030 Max	0.030 Max	12.5～13.5
DIN 17350	C	Si	Mong	P	S	Kr
1.2083/ X42Cr13	≤1.00	≤1.00	0.20～0.40	0.030 Max	0.030 Max	12.5～13.5
GB/T 9943	C	Si	Mong	P	S	Kr
4Kr13	0.35～0.45	≤0.60	≤0.80	0.030 Max	0.030 Max	12.0～14.0
JIS G4403	C	Si	Mong	P	S	Kr
SUS420J2	0.26～0.40	≤1.00	≤1.00	0.030 Max	0.030 Max	12.0～14.0

1.2083 Boitsebiso bo Tšoanang le Lintlha Tse Amanang

usa	Sejeremane	Japane	China	ISO
ASTM A681	DIN 17350	JIS G4403	GB/T 9943	ISO 4957
420 Fetotse	1.2083/X42Cr13	SUS420J2	4Kr13	X42Cr13

---

DIN W-N r 1.2083 Material Mechanical Properties

Ho thatafala ka mor'a boleng ba ho futhumatsa/MPa | 400 ℃.: 1910

Ho thatafala ka mor'a boleng ba ho futhumatsa/MPa | 500 ℃: 1860

Ho thatafala ka mor'a boleng ba ho futhumatsa/MPa | 600 ℃: 1130

Ho thatafala ka mor'a boleng ba ho futhumatsa/MPa | 650 ℃: 930

---

E thehiloe ho 1.2083

Pre-Heating ho 600 ℃, Ebe mocheso ho ea mocheso o entsoeng. Soak ka 800-1100 ° C, etsa bonnete ba hore mocheso o phetse hantle. Ebe o qala ho qhekella, mocheso o entsoeng ha o tlase ho 650 ℃. Ka mor'a ho pheha, pholile butle-butle.

---

Phekolo ea Mocheso ea DIN 1.2083 Plastic Steel

• 1.2083 Annealing

Mocheso o fokolang ho isa ho 750-800 ℃, ebe butle o Pholisa ho isa ho 538 ℃(1000℉) ka seboping sa mocheso. Ebe o pholile moeeng. Ka mor'a annealing hardness HBS: 225 Max

• Din W-Nr 1.2083 Ho thatafatsa

1.2083 tšepe e nang le boima bo phahameng haholo 'me e lokela ho thatafatsoa ke ho pholile moeeng o khutsitseng. Tšebeliso ea sebōpi sa letsoai kapa sebōpi se laoloang se laolehile ho fokotsa decarburization, 'me haeba e le sieo, ho kgothaletswa ho tiisa pakete ka har'a pitch coke e sebelisitsoeng.

• Ho tima lintho tse entsoeng ka Stainless Plastic hlobo 1.2083

Mocheso oa ho tima / ℃ : 1020 ~ 1050

Mokhoa oa ho tima: Pholiso ea oli

boima: 50 HRc

• Phetoho ea 1.2083

Mocheso oa mocheso / ℃ : 200-300

Ka mor'a ho kokobetsa boima ba HRC kapa ho feta: 28-34 HRc

---

Tšebeliso ea Din X42Cr13 W-Nr 1.2083

1.2083 e loketse ts'ebetso ea khoholeho ea motlakase, e loketseng bakeng sa lipolasetiki tsa hlobo le litlhoko tsa asiti tse ntle. Haholo-holo e sebelisoang ho hlahisa hlobo ea PVC, ho apara le ho tlatsa hlobo, ho kenyelletsa le mofuta o chesang o thata oa hlobo ea polasetiki, hlobo ea bophelo bo bolelele, joalo ka: hlobo ea tableware e lahloang, tlhahiso ea likarolo tsa optical, joalo ka khamera, likhalase tsa letsatsi, lijana tsa bongaka. le joalo-joalo.

---

Boleng bo netefalitsoeng ba X42Cr13/1.2083

Boleng bo tiisitsoe ke ISO 9001: Sistimi ea taolo ea boleng ea 2008. Litšepe tsa rona tse 2083 kaofela li bile le tlhahlobo ea ultrasonic ea SEP 1921-84 (UT Test). Kereiti ya Boleng: E/e, D/d, C/c.

Haeba u na le lipotso tsa tšepe tsa 1.2083 le potso bakeng sa Theko, Kopo, phekolo e chesang, Ka kopo u se ke ua tsilatsila ho ikopanya le rona.