35CrMnSiA letlapa la tšepe le kolobisitsoeng le chesang

35CrMnSiA ke tšepe e nang le alloy e tlase e matla haholo. Ka mor'a phekolo ea mocheso, e na le lisebelisoa tse ntle tsa mochine, matla a phahameng, boima bo lekaneng, boima, weldability (preheating pele ho tjheseletsa), le sebopeho sa ho sebetsa, empa e na le khanyetso e ntle ea kutu le khanyetso e tlaase ea oxidation, e atisang ho sebelisoa ka mor'a hore mocheso o fokotsehe kapa o fokotsehe. Matla a phahameng a tingoeng le a futhumetseng a tšepe ea sebopeho. E na le matla a phahameng le ho tiea, boima bo phahameng, polasetiki ea deformation e batang e mahareng, le ts'ebetso e ntle ea ho itšeha. Ho na le tšekamelo ea ho halefa brittleness, 'me matla a ho fetela ha a na matla. Ts'ebetso ea tjheseletsa e betere, empa ha botenya bo feta 3mm, e lokela ho futhumatsoa pele ho 150 ℃, 'me kalafo ea mocheso e hlokahala kamora ho cheselletsa. Hangata e sebelisoa ka mor'a ho nosetsa.

Moreroedit
35CrMnSiA e sebelisetsoa ho etsa likarolo tsa lebelo le bohareng, tse boima, tse matla, tse thata haholo le likarolo tse matla haholo.
E sebelisoa haholo ho etsa likarolo tse fapaneng tsa bohlokoa tse nang le mojaro o phahameng le lebelo le phahameng, joalo ka likere, shafts, clutches, sprockets, grinding wheel shafts, bushings, bolts, nuts, joalo-joalo. mocheso o sebetsang le mojaro o fapaneng. Likarolo tse cheselitsoeng joalo ka li-blades tse nang le khatello e phahameng, li-valve plate le lipeipi tse sa senyeng.

	Sebopeho sa Lik'hemik'hale (%)
Kereiti ea tšepe	C	Si	Mong	P	S	Kr	Ni	Cu
35CrMnSiA	0.32-0.39	1.10～1.40	0.80～1.10	≤0.025	≤0.025	1.10～1.40	≤0.030	≤0.025

Thepa ea mechine

Matla a tlhahiso σs/MPa (>=)	Matla a thata σb/MPa (>=)	Matla a amang	Phokotso ea sebaka ψ/% (>=)	Tšusumetso e monyang matla αkv (J/cm²) (>=)
≥1275(130)	≥1620(165)	≥31	≥40	≥39(4)

Litlhaloso tsa phekolo ea mocheso le mokhatlo oa metallographic
Litlhaloso tsa phekolo ea mocheso: (1) Ho tima: pele 950 ℃, ea bobeli 890 ℃, ho pholisa oli; ho futhumatsa 230 ℃, ho pholisa moea, ho futhumatsa oli; (2) 880 ℃ e matla ho 280～310℃.
Boemo ba ho pepa bo lokela ho hlalosoa tumellanong ha bo fanoa ka phekolo ea mocheso (normalizing, annealing kapa mocheso o phahameng oa mocheso) kapa ntle le phekolo ea mocheso.

GB/T 11251 35CrMnSiA lipoleiti tsa tšepe tse chesang tsa Gnee li sebelisoa haholo ho etsa lebelo le bohareng, mojaro o boima, matla a phahameng, likarolo tse thata tse phahameng le likarolo tse matla tse phahameng. Gnee steel e ikemiselitse ho ba morekisi oa hau ea tšepahalang oa 35CrMnSiA hot rolled alloy steel plate.

Gnee Steel e sebetsa ka ho khetheha ho GB/T 11251 35CrMnSiA lipoleiti tsa tšepe tse kolobisitsoeng tse chesang tse tlas'a boitsebiso ba GB/T.GB/T 11251 35CrMnSiA lipoleiti tsa tšepe tse chesang tse chesang li na le thepa e babatsehang ea mochine le ts'ebeliso e pharaletseng. Ho kopanya melemo e ka holimo ho ka fanoa ka ho fetisisa ho latela litlhoko tsa bareki. Ho feta moo, re tla fana ka ho itšeha, pretreatment, galvanizing, liteko, lits'ebeletso tsa kalafo ea mocheso bakeng sa GB/T 11251 35CrMnSiA lipoleiti tsa tšepe tse kolobisitsoeng tse chesang.