ASME SA192 Seamless Boiler Pipe for heat exchanger Specification
This guide covers standard specifications for minimum-wall-thickness, seamless carbon steel boiler and superheater tubes for high-pressure service. The steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, and silicon. The tubes shall have a hardness number not exceeding a specific value. The following mechanical tests shall be conducted, namely: flattening test; flaring test; hardness test; and hydrostatic test.
1.This specification covers minimum-wall-thickness, seamless carbon steel boiler and superheater tubes for high-pressure service.
2.SA192 Boiler Tubes sizes and thicknesses usually furnished to this specification are 1/2 in. to 7 in. [12.7 to 177.8 mm] outside diameter and 0.085 to 1.000 in. [2.2 to 25.4 mm], inclusive, in minimum wall thickness. Tubing having other dimensions may be furnished, provided such tubes comply with all other requirements of this specification.
3.Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] inside diameter or 0.015 in. [0.4 mm] thickness.
|A192 Tubes Specification||ASTM A192 / ASME SA192|
|A192 Tubes Grades||A192 Grade Tubes and Tubing|
|A192 Tubes Type||Seamless – Hot Rolled / Cold Drawn|
|A192 Tubes Outer Diameter Size||1/4" NB To 2" NB (Nominal Bore Size)|
|A192 Tubes Wall Thickness||1 mm Thickness to 8 mm Thickness|
|A192 Tubes Length||
5800mm; 6000mm; 6096mm; 7315mm; 11800mm; and so on. Max length: 27000mm, also U bending can be offered.
|A192 Tubes Ends||Plain Ends / Beveled Ends / Coupling|
|A192 Tubes Delivery Conditions||As Rolled, Cold Drawn, Normalizing Rolled|
|A192 Tubes Coating||Epoxy Coating / Colour Paint Coating / 3LPE Coating.|
|A192 Tubes Other Testing||NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, SWC, H2 SERVICE, IBR, PWHT etc.|
|A192 Tubes Dimension||All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM, ASME, API.|
A192 seamless carbon steel pipe Mechanical properties
|Yield||Tensile||Elongation A5 min|
|MPa min||ksi min||MPa min||MPa min||ksi min||Percentage|
Outside Diameter & Tolerance
|Outside Diameter, mm||Tolerance, mm|